• Honors Diploma of Engineer (Eqv. to B.Eng. & M.Eng. in Mechanical Engineering), Moscow Power Engineering Institute (MPEI), Russia
• D.Eng. in Steam Boilers & Steam Generators, MPEI, Russia

Thermal power plants; Boiler and furnace technology; Combustion and emission control in boilers fired with fossil fuels; Fluidized bed combustion (FBC) of biomass residues and wastes; Assessment of environmental impacts by thermal power plants and FBC systems.

Analysis and Improvement of Thermal Efficiency and Environmental Performance of Boiler Units

In many countries with developing economies, fossil fuels of relatively low quality (e.g. lignite) and/or high-calorific fuels with elevated contents of fuel-S and fuel-N are used for power generation. Such a situation results in significant environmental impacts by pollutants discharged from boilers of thermal power plants. Implementation of least-cost methods for the improvement of thermal efficiency and environmental performance of operating utilities seems to be the most attractive way for energy conservation as well as mitigating environmental impacts by the power producers. Research works relevant to this objective include various aspects, such as: (1) exploring technological options for the improvement of the thermal efficiency and environmental performance of existing boiler units; (2) optimization of key operating variables affecting the combustion process in a boiler furnace when firing distinct fuels and/or fuel blends; (3) optimal load dispatching over the boiler units of a power plant. Additionally, through modeling the emission rates of different pollutants (NO_x, CO₂, CO, SO_x, PM, trace elements) discharged from distinct boiler units, reliable data for the assessment of environmental impacts by a power plant can be obtained for various fuel options taking into account actual unit operating conditions and power outputs.

Development and Study of Fluidized Bed Combustion Systems for Firing Biomass Fuels

Biomass is one of the major primary energy sources in Thailand. Residues and wastes collected on a large scale from the agricultural and forest-related activities such as rice, sugar, wood and palm oil industries can be used (alternatively to fossil fuels) as the energy sources for heat and power production in this country. Thus, the development of highly efficient, reliable and environmentally friendly technologies for biomass utilization with the aim of energy production is a problem of paramount importance for the Thai energy sector. Due to some advantages, the fluidized bed combustion technology seems to be the most suitable for energy conversion from biomass. Conical fluidized-bed combustors of various modifications have been proposed and being studied. The research objectives include: (1) investigation of fluidization characteristics of the bed material in conical prototypes; (2) study of the effects of fuel and bed material types as well as operating conditions (including air staging) on the combustion efficiency and emission characteristics of the combustor; (3) study of the physical and chemical factors affecting formation and reduction of major pollutants in the combustor; (4) optimization of the combustor design and its operating conditions; (5) assessment of environmental impacts for various biomass fuels; (6) study on co-firing of different biomass fuels and/or co-firing of biomass with coal in a conical fluidized bed.

Master Theses Supervised
2004:	Vicharn Tanetsakunvatana. Influence of Coal Quality and Operating Conditions on Thermal Efficiency and Environmental Performance of Coal-fired Boilers of a Thermal Power Plant. Joint Graduate School of Energy and Environment.
2012	Songpol Chakritthakul. Experimental Study on Co-firing of Eucalyptus Bark with High-calorific Biomass Fuels in a Swirling Fluidized-bed Combustor.
Doctoral Theses Supervised
2003:	Watchara Permchart. Development and Study of a Conical Fluidized-bed Combustor Firing Biomass Fuels. Joint Graduate School of Energy and Environment.
2007:	Watcharee Kaewboonsong. Development and Application of Computational Methods for Minimizing Fuel and Environmental Costs for a Variable-load Power Plant Firing Fuel Oil/Gas.
2008:	Kasama Janvijitsakul. Effects of Operating Conditions on Major and PAH Emissions from a Conical Fluidized-bed Combustor Firing Thai Rice Husk.
2009:	Rachadaporn Kaewklum. Hydrodynamics and Biomass Combustion in Cone-shaped Conventional and Swirling Fluidized Beds.
Current:	Porametr Arromdee. A Study on (co-)firing of some Unconventional Biomass Fuels in a Conical Fluidized-Bed Combustor.
Current:	Pichet Ninduangdee. Study on Methods for Minimizing Gaseous Emissions and Preventing Bed Agglomeration during Fluidized-Bed Combustion of Oil Palm Residues.

• Advisor and member of editorial board, GMSARN International Journal (since 2007)
• Reviewer for international journals: Fuel, Energy, Energy & Fuels, Bioresource Technology, Fuel Processing Technology, Biomass & Bioenergy, Applied Energy, IEEE Transactions on Energy Conversion, Heat Transfer Engineering, Applied Thermal Engineering, International Journal of Thermal Sciences, Clean Air Journal.

• 1998-Present: SIIT
• 1994-1998: Expert (Visiting Professor) King Mongkut’s University of Technology Thonburi, Thailand.
• 1982-1994: Associate Professor, Department of Steam Generator Design, Moscow Power Engineering Institute, Russia.
• 1976-1982: Assistant Professor, Department of Steam Generator Design, Moscow Power Engineering Institute, Russia.
• 1972-1976: Junior Researcher, Department of Steam Generator Design, Moscow Power Engineering Institute, Russia

• Ninduangdee, P. and Kuprianov, V.I. (2013). Experimental study on combustion of oil palm shells in a conical fluidized-bed combustor using an alternative bed material. In Proceedings of the 4th International Conference on Power Engineering, Energy and Electrical Drives [CD-ROM], 13-17 May 2013, Istanbul, Turkey, 6 p.
• Arromdee, P. and Kuprianov , V.I. (2012). Comparative study on firing of some Thai unconventional biomass fuels in a conical fluidized-bed combustor. In Proceedings of the Third TSME International Conference on Mechanical Engineering [CD-ROM], 24-27 October 2012, Chiang Rai, Thailand, 8 p.
• Arromdee, P. and Kuprianov, V.I. (2012). A comparative study on combustion of sunflower shells in bubbling and swirling fluidized-bed combustors with a cone-shaped bed, Chemical Engineering and Processing: Process Intensification, Vol. 62 (2012), pp. 26-38.
• Kuprianov, V.I., Arromdee, P., and Ninduangdee, P. (2012). Study on burning of peanut, tamarind and oil palm shells in a fluidized-bed combustor using alumina as the bed material. In Proceedings of the 3^rd Asian Conference on Innovative Energy & Environmental Chemical Engineering (ASCON-IEEChE 2012), 11-14 November 2012, Hualien, Taiwan, pp. 91-96.
• Ninduangdee, P. and Kuprianov, V.I. (2012). Measures for reliable and effective operation of a conical fluidized-bed combustor fired with oil palm shells: a cold-state hydrodynamic study. In Proceedings of the Third TSME International Conference on Mechanical Engineering [CD-ROM], 24-27 October 2012, Chiang Rai, Thailand, 8 p.
• Ninduangdee, P. and Kuprianov, V.I. (2012). Measures for reliable and effective operation of a conical fluidized-bed combustor fired with oil palm shells: a combustion study. In Proceedings of the Third TSME International Conference on Mechanical Engineering [CD-ROM], 24-27 October 2012, Chiang Rai, Thailand, 9 p.
• Arromdee, P. and Kuprianov, V.I. (2012). Combustion of peanut shells in a cone-shaped bubbling fluidized-bed combustor using alumina as the bed material, Applied Energy, Vol. 97, September 2012, pp. 470-482.
• Kuprianov, V.I. and Arromdee, P. (2012). Effects of operating conditions on combustion of peanut and tamarind shells in a conical fluidized-bed combustor. In Proceedings of the 5th International Conference on Sustainable Energy & Environmental Protection - Part I (SEEP 2012), 5-8 June 2012, Ireland, pp. 41-46.
• Arromdee, P., Kuprianov, V.I., Aunsakul, C., Polthai, C., Tuenudomseel, D., Tangphong P., and Sookkasem, W. (2011). Comparative studies on combustion of peanut and tamarind shells in a bubbling fluidized bed: fluidization characteristics of binary alumina–biomass mixtures, In Proceedings of the Second TSME International Conference on Mechanical Engineering, 19-21 October, 2011, Krabi, Thailand, 10 p.
• Arromdee, P., Kuprianov, V.I., Nithikan, M., Wongjaturapat, N., Pasutnavin, R., Tilokkul, T, Thamrongdullapark, V., and Lamlertpongpana, W. (2011). Comparative studies on combustion of peanut and tamarind shells in a bubbling fluidized bed: combustion and emission characteristics, In Proceedings of the Second TSME International Conference on Mechanical Engineering, 19-21 October, 2011, Krabi, Thailand, 11 p.
• Chakritthakul, S. and Kuprianov, V.I. (2011). Co-firing of eucalyptus bark and rubberwood sawdust in a swirling fluidized-bed combustor using an axial flow swirler. Bioresource Technology, Vol. 102, Issue 17, pp. 8268-8278.
• Kuprianov, V.I., Arromdee, P. (2011). A pilot study on combustion of peanut shells in a cone-shaped bubbling fluidized-bed combustor using alumina sand as the bed material. In Proceedings of the Third International Conference on Applied Energy (ICAE 2011) [CD-ROM], 16-18 May 2011, Perugia, Italy, pp. 1595-1606.
• Kuprianov, V.I., Arromdee, P., Chakritthakul, S., Kaewklum, R., Sirisomboon, K. (2011). Combustion of some Thai agricultural and wood residues in a pilot swirling fluidized-bed combustor. In Proceedings of the World Renewable Energy Congress 2011 [CD-ROM], 8-13 May 2011, Linköping, Sweden, 8 p.
• Kuprianov, V.I., Kaewklum, R., Chakritthakul, S. (2011). Effects of operating conditions and fuel properties on emission performance and combustion efficiency of a swirling fluidized-bed combustor fired with a biomass fuel, Energy, Vol. 36, Issue 4, pp. 2038-2048.
• Kuprianov, V.I., Kaewklum, R., Sirisomboon, K., Arromdee, P., Chakritthakul, S. (2010). Combustion and emission characteristics of a swirling fluidized-bed combustor burning moisturized rice husk, Applied Energy, Vol. 87, Issue 9, pp. 2899-2906.
• Kaewklum, R., Kuprianov, V.I. (2010). Comparative studies on combustors with conventional and swirling fluidized beds: hydrodynamic characteristics of gas-solid fluidized beds. In Proceedings of the International Conference on Innovations for Renewable Energy (IRE 2010), 21-23 September 2010, Hanoi, Vietnam, pp. 93-100.
• Kuprianov, V.I., Kaewklum, R. (2010). Comparative studies on combustors with conventional and swirling fluidized beds: combustion and emission characteristics for firing rice husk. In Proceedings of the International Conference on Innovations for Renewable Energy (IRE 2010) , 21-23 September 2010, Hanoi, Vietnam, pp. 101-108.
• Arromdee, P., Kuprianov, V.I. (2010). A pilot study on combustion and emission performance of a conical fluidized-bed combustor firing sunflower shells. In Proceedings of the International Conference on Innovations for Renewable Energy (IRE 2010) , 21-23 September 2010, Hanoi, Vietnam, pp. 109-116.
• Chakritthakul, S., Kuprianov, V.I. (2010). Experimental study on co-firing of eucalyptus bark with fine sawdust in a swirling fluidized-bed combustor. In Proceedings of the International Conference on Innovations for Renewable Energy (IRE 2010) , 21-23 September 2010, Hanoi, Vietnam, pp. 117-125.
• Arromdee, P., Kuprianov, V.I., Kaewklum, R., Sirisomboon, K. (2010). Experimental study on combustion of sunflower shells in a pilot swirling fluidized-bed combustor, Energy & Fuels, Vol. 24, Issue 7, pp. 3850-3859.
• Arromdee, P., Kuprianov, V.I. (2010). Combustion of sunflowers shells in conventional and swirling fluidized beds: a comparative study between two combustion techniques. In Proceedings of the 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France. pp. 1156-1166.
• Sirisomboon, K., Kuprianov, V.I., Arromdee, P. (2010). Effects of design features on combustion efficiency and emission performance of a biomass-fuelled fluidized-bed combustor, Chemical Engineering and Processing: Process Intensification, Vol. 49, Issue 3, pp. 270-277.
• Arromdee, P., Kuprianov, V.I., Kaewklum, R., Sirisomboon, K. (2010). Experimental study on combustion of biomass fuels in a swirling fluidized bed. In Proceedings of the International Conference on Applied Energy (ICAE 2010) [CD-ROM], 21-23 April 2010, Singapore, pp. 435-446.
• Kaewklum, R., Kuprianov, V.I. (2010). Experimental studies on a novel swirling fluidized-bed combustor using an annular spiral air distributor, Fuel, Vol. 89, Issue 1, pp. 43-52.
• Kaewklum, R., Kuprianov, V.I., Douglas, P.L. (2009). Hydrodynamics of air–sand flow in a conical swirling fluidized bed: A comparative study between tangential and axial air entries, Energy Conversion and Management, Vol. 50, Issue 12, pp. 2999-3006.
• Kuprianov, V.I., Kaewklum, R., Chakritthakul, S. (2009). Effects of operating conditions and biomass fuel properties on emission performance and combustion efficiency of a swirling fluidized-bed combustor. In Proceedings of the 5th Dubrovnik Conference on Sustainable Development of Energy Water and Environment Systems, 29 September – 3 October 2009, Dubrovnik, Croatia. 16 p.
• Kuprianov, V.I., Kaewklum, R., Sirisomboon, K., Arromdee, P., Chakritthakul, S. (2009). Improvement of combustion efficiency and minimizing CO and NO emissions of a swirling fluidized-bed combustor firing rice husk. In Proceedings of the 2nd International Conference on Clean Electrical Power (ICCEP 2009) [CD-ROM], 9-11 June 2009, Capri, Italy. pp. 9-16.
• Chakritthakul, S., Kuprianov, V.I., Kaewklum, R. (2009). Effects of air staging on behavior of CO, NO and CxHy in a swirling fluidized-bed combustor firing Thai rice husk. In Proceedings of the World Renewable Energy Congress 2009 – Asia: The 3rd International Conference on Sustainable Energy and Environment (SEE 2009) [CD-ROM], 19-22 May 2009, Bangkok, Thailand. Paper No. A2-050, pp. 264-269.
• Arromdee, P., Kuprianov, V.I., Kaewklum, R., Sirisomboon, K. (2009). Combustion and emission performance of a swirling fluidized-bed combustor fired with sunflower shells. In Proceedings of the World Renewable Energy Congress 2009 – Asia: The 3rd International Conference on Sustainable Energy and Environment (SEE 2009) [CD-ROM], 19-22 May 2009, Bangkok, Thailand. Paper No. A2-057, pp. 288-293.
• Sirisomboon, K., Kuprianov, V.I., Kaewklum, R. (2009). Effects of design features on combustion and emission characteristics of a conical fluidized-bed combustor. In Proceedings of the World Renewable Energy Congress 2009 – Asia: The 3rd International Conference on Sustainable Energy and Environment (SEE 2009) [CD-ROM], 19-22 May 2009, Bangkok, Thailand. Paper No. A2-071, pp. 314-319.
• Kaewklum, R., Kuprianov, V.I. (2009). Hydrodynamics and combustion of Thai rice husk in a conical swirling fluidized-bed combustor. In Proceedings of the First International Conference on Applied Energy (ICAE'09) [CD-ROM], 5-7 January 2009, Hong Kong. pp. 234-245.
• Kuprianov, V.I., Kaewklum, R., Janvijitsakul, K., Arromdee, P., Chakritthakul, S. (2009). Combustion and emission characteristics of burning moisturized rice husk in a swirling fluidized-bed combustor. In Proceedings of the First International Conference on Applied Energy (ICAE'09) [CD-ROM], 5-7 January 2009, Hong Kong. pp. 279-290.
• Janvijitsakul, K., Kuprianov, V.I. (2009). Improvement of combustion efficiency and emission performance through design modification of a conical fluidized-bed combustor. In Proceedings of the First International Conference on Applied Energy (ICAE'09) [CD-ROM], 5-7 January 2009, Hong Kong. pp. 455-465.
• Janvijitsakul, K., Kuprianov, V.I. (2008). Experimental study on combustion of moisturized rice husk in a fluidized bed, Thammasat International Journal of Science and Technology, Vol. 13, Special Edition, November 2008, pp. 54-60 . [Originally presented at the 1st Thammasat University International Conference on Chemical, Environmental and Energy Engineering (TU ChEEE 2008), 4 March 2008, Bangkok, Thailand].
• Kuprianov, V.I., Kaewklum, R., Janvijitsakul, K., Arromdee, P., Chakritthakul, S. (2008). A study of firing rice husk in a swirling fluidized-bed combustor using annular spiral air distributor. In Proceedings of the 2nd WSEAS/IASME International Conference on Energy Planning, Energy Saving, Environmental Education (EPESE’08), 26-28 October 2008, Corfu, Greece. pp. 30-35.
• Janvijitsakul, K., Kuprianov, V.I. (2008). Major gaseous and PAH emissions from a fluidized-bed combustor firing rice husk with high combustion efficiency, Fuel Processing Technology, Vol. 89, Issue 8, pp. 777-787.
• Janvijitsakul, K., Kuprianov, V.I. (2008). Similarity and modeling of axial CO and NO concentration profiles in a fluidized-bed combustor (co-)firing biomass fuels, Fuel, Vol. 87, Issues 8-9, pp. 1574-1584.
• Janvijitsakul, K., Kuprianov, V.I., Arromdee, P. (2008). Formation and Reduction of CO and NOx in a Rice Husk-Fuelled Fluidized-Bed Combustor Using Air Staging. In Proceedings of the International Conference on Environmental Research and Technology (ICERT’08), 28-30 May 2008, Penang, Malaysia, pp. 303-307.
• Kuprianov, V.I., Kaewboonsong, W., Tanetsakunvatana, V. (2008). Assessment of Major Emissions from Power Generation Units Firing Fossil Fuels: Part 1. Validation of Emission Models for Variable Operating Conditions. In Proceedings of the International Conference on Environmental Research and Technology (ICERT’08) , 28-30 May 2008, Penang, Malaysia, pp. 828-833.
• Kuprianov, V.I., Kaewboonsong, W., Tanetsakunvatana, V. (2008). Assessment of Major Emissions from Power Generation Units Firing Fossil Fuels: Part 2. Predicted and Experimental Results for Different Fuel Options. In Proceedings of the International Conference on Environmental Research and Technology (ICERT’08) , 28-30 May 2008, Penang, Malaysia, pp. 834-839.
• Kaewklum, R., Kuprianov, V.I. (2008). Theoretical and experimental study on hydrodynamic characteristics of fluidization in air– sand conical beds, Chemical Engineering Science, Vol. 63, Issue 6, pp. 1471-1479.
• Kaewklum, R., Kuprianov, V.I. (2008). Hydrodynamics of air-sand flow in a conical swirling fluidized bed. In Proceedings of the 1st Thammasat University International Conference on Chemical, Environmental and Energy Engineering (TU ChEEE 2008) [CD-ROM], 4 March 2008, Bangkok, Thailand. 6 p.
• Kuprianov, V.I., Kaewboonsong, W., Douglas, P.L. (2008). Minimizing fuel and environmental costs for a variable-load power plant (co-)firing fuel oil and natural gas. Part 2. Optimization of load dispatch. Fuel Processing Technology, Vol. 89, Issue 1, pp. 55-61.
• Rachadaporn Kaewklum, Kuprianov, V.I., Kasama Janvijitsakul and Watchara Permchart. (2007). Influence of fuel moisture content and excess air on formation and reduction of co and no in a fluidized bed combustor fired with thai rice husk. Asian Journal on Energy and Environment, Vol. 8, Issue 2, pp. 547-555.
• Kasama Janvijitsakul and Kuprianov, V.I. (2007). Polycyclic aromatic hydrocarbons in coarse fly ash particles emitted from fluidized bed combustion of thai rice husk. Asian Journal on Energy and Environment, Vol. 8, Issue 4, pp. 654-662.
• Janvijitsakul, K., Kuprianov, V.I., Arromdee, P., Douglas, P.L. (2007). Effects of operating conditions and air-staging on combustion and emission performance of a 400 kWth fluidized-bed combustor firing rice husk. In Proceedings of the Second GMSARN International Conference 2007 on Sustainable Development: Challenges and Opportunities for the Greater Mekong Subregion [CD-ROM], 12-14 December 2007, Pattaya, Thailand. Paper No. E-26, 7 p.
• Kuprianov, V.I., Kaewboonsong, W., Tanetsakunvatana, V. (2007). Emissions from large Thai utilities (co-)fired with fossil fuels. In Proceedings of the Second GMSARN International Conference 2007 on Sustainable Development: Challenges and Opportunities for the Greater Mekong Subregion [CD-ROM], 12-14 December 2007, Pattaya, Thailand. Paper No. ENV-09, 8 p.
• Kaewklum, R., Kuprianov, V.I., Chovichien, N. (2007). Hydrodynamics of a swirling fluidized bed in a conical prototype. Part 1: Experimental results for different types of air injection. In Proceedings of International Conference on Engineering, Applied Sciences and Technology (ICEAST 2007) [CD-ROM], 21-23 November 2007, Bangkok, Thailand, Paper No. 289, pp. 854-857.
• Chovichien, N., Kuprianov, V.I., Kaewklum, R. (2007). Hydrodynamics of a swirling fluidized bed in a conical prototype. Part 2: Experimental results for different rice husk-sand mixtures. In Proceedings of International Conference on Engineering, Applied Sciences and Technology (ICEAST 2007) [CD-ROM], 21-23 November 2007, Bangkok, Thailand, Paper No. 288, pp. 850-853.
• Janvijitsakul, K., Kuprianov, V.I. (2007). Emission of polycyclic aromatic hydrocarbons from the fluidized-bed combustion of Thai rice husk. In Proceedings of the Sixth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2007) [CD-ROM], 7-11 May 2007, Bangkok, Thailand. Paper No. COM7, 7 p.
• Janvijitsakul, K., Kuprianov, V.I. (2007). Modeling of axial CO and NO concentration profiles in a fluidized-bed combustor firing biomass fuels. In Proceedings of the Sixth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2007) [CD-ROM], 7-11 May 2007, Bangkok, Thailand. Paper No. COM6, 7 p.
• Kaewklum, R., Kuprianov, V.I. (2007). Hydrodynamic characteristics of fluidization in air-sand conical beds. In Proceedings of the Sixth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2007) [CD- ROM], 7-11 May 2007, Bangkok, Thailand. Paper No. MMD11, 7 p.
• Kuprianov, V.I., Kaewboonsong, W., Chovichien, N. (2007). Predicting fuel and emission costs for a utility boiler co-firing fuel oil and natural gas. In Proceedings of the Sixth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2007) [CD-ROM], 7-11 May 2007, Bangkok, Thailand. Paper No. PGN4, 7 p.
• Kuprianov, V.I., Kaewklum, R., Chovichien, N., Thana-Anekcharoen, K., Benjarungroj, P. (2007). Experimental study on hydrodynamics of swirling fluidized bed of biomass-sand mixtures in a conical prototype. In Proceedings of the Sixth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2007) [CD-ROM], 7-11 May 2007, Bangkok, Thailand. Paper No. ENG11, 6 p.
• Tanetsakunvatana, V., Kuprianov, V.I. (2007). Experimental study on effects of operating conditions and fuel quality on thermal efficiency and emission performance of a 300-MW boiler unit firing Thai lignite, Fuel Processing Technology, Vol. 88, Issue 2, pp. 199-206.
• Kuprianov, V.I. and Watchara Permchart. (2006). Experimental study on firing of some viable thai biomass fuels in a conical fluidized bed combustor. Asian Journal on Energy and Environment, Vol. 7, Issue 1, pp. 277-288.
• Kaewboonsong, W., Kuprianov, V.I., Chovichien, N. (2006). Minimizing fuel and environmental costs for a variable-load power plant (co-)firing fuel oil and natural gas. Part 1. Modeling of gaseous emissions from boiler units. Fuel Processing Technology, Vol. 87, Issue 12, pp. 1085-1094.
• Chovichien, N., Kuprianov, V.I., Kaewboonsong, W. (2006). Modeling major gaseous emissions from a 310-MW boiler unit co- firing medium-sulphur fuel oil and natural gas with variable ratio of fuel feed rates. In Proceedings of the 2nd Joint International Conference on Sustainable Energy and Environment (SEE 2006), 21-23 November 2006, Bangkok, Thailand, pp. 755-760.
• Janvijitsakul, K., Kuprianov, V.I. (2006). Least-cost NOx emissions control in a fluidized-bed combustor fired with rice husk. In Proceedings of the 2nd Joint International Conference on Sustainable Energy and Environment (SEE 2006), 21-23 November 2006, Bangkok, Thailand, pp. 372-377.
• Janvijitsakul, K., Kuprianov, V.I. (2006). Polycyclic aromatic hydrocarbons in coarse fly ash particles emitted from fluidized-bed combustion of Thai rice husk. In Proceedings of the 2nd Joint International Conference on Sustainable Energy and Environment (SEE 2006), 21-23 November 2006, Bangkok, Thailand, pp. 378-383.
• Kaewklum, R., Kuprianov, V.I., Janvijitsakul, K., Permchart, W. (2006). Influence of fuel-moisture content and excess air on formation and reduction of CO and NO in a fluidized-bed combustor fired with Thai rice husk. In Proceedings of the 2nd Joint International Conference on Sustainable Energy and Environment (SEE 2006), 21-23 November 2006, Bangkok, Thailand, pp. 384-389.
• Kaewklum, R., Kuprianov, V.I. (2006). Modeling and experimental study on fluidization characteristics of an air-sand bed in a conical fluidized-bed combustor. In Proceedings of the 2nd Joint International Conference on Sustainable Energy and Environment (SEE 2006), 21-23 November 2006, Bangkok, Thailand, pp. 390-396.
• Kaewklum, R., Kuprianov, V.I., Janvijitsakul, K., Permchart, W. (2006). Axial CO and NO profiles in a fluidized-bed combustor firing rice husk for different fuel qualities. In Proceedings of the Great Wall World Renewable Energy Forum and Exhibition (GWREF 2006) [CD-ROM], 23-27 October 2006, Beijing, China, 10 p.
• Kuprianov, V.I., Permchart, W., Janvijitsakul, K. (2006). Comparative study on feasible options for fluidized bed combustion of sugar cane bagasse. In Proceedings of the Great Wall World Renewable Energy Forum and Exhibition (GWREF 2006) CD-ROM], 23-27 October 2006, Beijing, China, 13 p.
• Kuprianov, V.I., Tanetsakunvatana, V. (2006). Assessment of gaseous, PM and trace element emissions from a 300-MW lignite- fired boiler unit for various fuel qualities. Fuel , Vol. 85, Issues 14-15, pp. 2171-2179.
• Kaewklum, R., Kuprianov, V.I., Permchart, W. (2006). Effects of operating conditions and fuel properties on the combustion efficiency and environmental performance of a fluidized-bed combustor firing rice husk. In Proceedings of the International Conference on Energy for Sustainable Development: Issue and Prospect for Asia (ESD 2006) [CD-ROM], 1-3 March 2006, Phuket, Thailand, Paper No. TI-11, 7 p.
• Janvijitsakul, K., Kuprianov, V.I., Permchart, W. (2006). Feasible options for firing sugar cane bagasse in a fluidized bed. In Proceedings of the International Conference on Energy for Sustainable Development: Issue and Prospect for Asia (ESD 2006) [CD-ROM], 1-3 March 2006, Phuket, Thailand, Paper No. WI-12, 6 p.
• Kuprianov, V.I., Janvijitsakul, K., Permchart, W. (2006). Co-firing of sugar cane bagasse with rice husk in a conical fluidized-bed combustor. Fuel, Vol. 85, Issue 4, pp. 434-442.
• Janvijitsakul, K., Kuprianov, V.I. (2005). Assessment of heat losses, combustion efficiency and major gaseous emissions for the co-firing of biomass fuels in a fluidized bed. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005) , 28–30 December 2005, Dhaka, Bangladesh. Paper No. TH-26, 6 p.
• Kaewboonsong, W., Kuprianov, V.I. (2005). Optimization of load dispatching for minimizing fuel and environmental costs at a variable-load power plant firing fuel oil/gas. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005) , 28–30 December 2005, Dhaka, Bangladesh. Paper No. TH-24, 5 p.
• Kaewklum, R., Kuprianov, V.I. (2005). Modeling of fluidization characteristics of quartz sand in a cone-shaped bed of a biomass combustor. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005), 28–30 December 2005, Dhaka, Bangladesh. Paper No. TH-18, 6 p.
• Kaewklum, R., Kuprianov, V.I., Permchart, W. (2005). Effects of fuel moisture on combustion efficiency and emission performance of a fluidized-bed combustor firing rice husk. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005) , 28–30 December 2005, Dhaka, Bangladesh. Paper No. TH-17, 6 p.
• Kuprianov, V.I., Tanetsakunvatana, V. (2005). Emissions of major pollutants from lignite-based power generation in Thailand: Part 1. Effects of seasonal fluctuations in the fuel quality. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005) , 28–30 December 2005, Dhaka, Bangladesh. Paper No. TH-43, 6 p.
• Kuprianov, V.I., Kaewboonsong W. (2005). Modeling emissions from the boiler units of a fuel oil/gas-fired power plant. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005), 28–30 December 2005, Dhaka, Bangladesh. Paper No. TH-23, 5 p.
• Tanetsakunvatana, V., Kuprianov, V.I. (2005). Emissions of major pollutants from lignite-based power generation in Thailand: Part 2. Annual rates over the post-crisis years. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005), 28–30 December 2005, Dhaka, Bangladesh. Paper No. TH-25, 6 p.
• Kuprianov, V.I. (2005). Applications of a cost-based method of excess air optimization for the improvement of thermal efficiency and environmental performance of steam boilers. Renewable & Sustainable Energy Reviews, Vol. 9, Issue 5, pp. 474- 498.
• Kaewklum, R., Kuprianov, V.I., Permchart, W. (2005). Effects of fuel moisture on combustion efficiency and emission performance of a fluidized-bed combustor firing rice husk. In Proceedings of the International Symposium on EcoTopia Science 2005 (ISETS05), Extended Abstracts, 8-9 August 2005, Nagoya, Japan, pp. 51-54.
• Kuprianov, V.I., Kaewboonsong, W. (2005). Minimizing fuel and environmental costs for a 1330-MW power plant firing fuel oil/gas. Part 1: Modeling emissions for the utility boilers. In Proceedings of the International Symposium on EcoTopia Science 2005 (ISETS05), Extended Abstracts, 8-9 August 2005, Nagoya, Japan, pp. 115-118.
• Kaewboonsong, W., Kuprianov, V.I. (2005). Minimizing fuel and environmental costs for a 1330-MW power plant firing fuel oil/gas. Part 2: Optimization of load dispatching. In Proceedings of the International Symposium on EcoTopia Science 2005 (ISETS05), Extended Abstracts, 8-9 August 2005, Nagoya, Japan, pp. 119-122.
• Kuprianov, V.I., Permchart, W., Janvijitsakul, K. (2005). Fluidized bed combustion of pre-dried Thai bagasse. Fuel Processing Technology, Vol. 86, Issue 8, pp. 849-860.
• Kaewboonsong, W., Kuprianov, V.I. (2005). Optimization of unit loading for minimizing fuel costs for a 1330-MW fuel oil-fired power plant. In Proceedings of the Fifth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2005), 8-11 May 2005, Wellington, New Zealand, pp. 225-230.
• Kuprianov, V.I., Permchart, W., Janvijitsakul, K. (2005). Co-firing of Thai rice husk and bagasse in a conical fluidized-bed combustor. In Proceedings of the Fifth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2005) , 8-11 May 2005, Wellington, New Zealand, pp. 80-85.
• Kuprianov, V.I., Tanetsakunvatana, V. (2005). Emissions of gaseous pollutants, PM and trace elements from a 300-MW boiler unit fired with low-rank coal. In Proceedings of the Fifth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2005) , 8-11 May 2005, Wellington, New Zealand, pp. 127-132.
• Janvijitsakul, K., Kuprianov, V.I., Permchart, W. (2004). Co-firing of rice husk and bagasse in a conical fluidized-bed combustor. In Proceedings of the Joint International Conference on Sustainable Energy and Environment (SEE), 1-3 December 2004, Hua Hin, Thailand, pp. 232-237.
• Kaewboonsong, W., Kuprianov, V.I. (2004). Minimizing fuel and environmental costs for a variable-load power plant co-firing fuel oil and natural gas. In Proceedings of the Joint International Conference on Sustainable Energy and Environment (SEE), 1-3 December 2004, Hua Hin, Thailand, pp. 419-424.
• Kuprianov, V.I., Permchart, W. (2004). Experimental study on firing of some viable Thai biomass fuels in a conical fluidized-bed combustor. In Proceedings of the Joint International Conference on Sustainable Energy and Environment (SEE), 1-3 December 2004, Hua Hin, Thailand, pp. 180-185.
• Tanetsakunvatana, V., Kuprianov, V.I. (2004). Effects of operating conditions and fuel quality on thermal efficiency and emission performance of a utility boiler firing Thai lignite. In Proceedings of the Joint International Conference on Sustainable Energy and Environment (SEE), 1-3 December 2004, Hua Hin, Thailand, pp. 425-430.
• Kaewboonsong, W., Kouprianov, V.I., Douglas, P.L., Elkamel, A. (2004). Optimization of unit loading for the 1330-MW power plant firing fuel oil. In Proceedings of the 3^rd International Conference on Heat Powered Cycles (HPC’2004) [CD-ROM], 11-13 October 2004, Larnaca, Cyprus. Paper No. 1115, 8 p.
• Tanetsakunvatana, V., Kouprianov, V.I. (2004). Specific emissions and annual rates of major pollutants from lignite-based power generation in Thailand over post-crisis years. In Proceedings of the 3^rd International Conference on Heat Powered Cycles (HPC’2004) [CD-ROM], 11-13 October 2004, Larnaca, Cyprus. Paper No. 1116, 9 p.
• Permchart, W., Kouprianov, V.I. (2004). Emission performance and combustion efficiency of a conical fluidized-bed combustor firing various biomass fuels. Bioresource Technology, Vol. 92. Issue 1, pp. 83-91.
• Janvijitsakul, K., Permchart, W., Kouprianov, V.I. (2004). Axial temperature and gas concentration profiles in a fluidized-bed combustor firing pre-dried bagasse. In Proceedings of the 15^th International Symposium on Transport Phenomena (ISTP-15) [CD-ROM], 9-13 May 2004, Bangkok, pp. 443-448.
• Permchart, W., Kouprianov, V.I. (2004). Fluidization characteristics of a conical sand bed. In Proceedings of the 15^th International Symposium on Transport Phenomena (ISTP-15) [CD-ROM], 9-13 May 2004, Bangkok, pp. 461-466.
• Kouprianov, V.I., Kaewboonsong, W. (2004). Modeling the effects of operating conditions on fuel and environmental costs for a 310 MW boiler firing fuel oil. Energy Conversion and Management, Vol. 45, Issue 1, pp. 1-14.
• Kouprianov, V.I., Tanetsakunvatana, V., Douglas, P.L. (2003). Effects of fuel quality on emission rates and specific emissions of major pollutants from lignite-based power generation in Thailand. In Proceedings of the 12^th International Conference on Science (12th ICCS) [CD-ROM], 2-6 November 2003, Cairns, Australia, paper 5A1, 10 p.
• Kaewboonsong, W., Kouprianov, V.I. (2003). Minimizing fuel and “external” costs for a variable-load utility boiler firing fuel oil. International Journal of Thermal Sciences, Vol. 42, Issue 9, pp. 889-895.
• Kouprianov, V.I., Permchart, W. (2003). Emissions from a conical FBC fired with a biomass fuel. Applied Energy, Vol. 74, Issues 3-4, pp. 383-392.
• Kouprianov, V.I., Tanetsakunvatana, V. (2003). Optimization of excess air for the improvement of environmental performance of a 150 MW boiler fired with Thai lignite. Applied Energy, Vol. 74, Issues 3-4, pp. 445-453.
• Kaewboonsong, W., Kouprianov, V.I., Chovichien, N., Wongsaengchan, C. (2003). Emissions from a utility boiler firing fuel oil, natural gas and fuel oil/gas mixture. In Proceedings of the Second Regional Conference on Energy Technology towards a Clean Environment (RCETCE 2003), 12-14 February 2003, Phuket, Thailand, Vol. 2, pp. 725-731.
• Kouprianov, V.I. (2003). A least-cost method for improvement of efficiency and environmental performance of boilers by optimizing excess of combustion air. In Proceedings of the Second Regional Conference on Energy Technology towards a Clean Environment (RCETCE 2003), 12-14 February 2003, Phuket, Thailand, Vol. 2, pp. 858-865.
• Lerdpatchareekul, N., Kouprianov, V.I., Suvachittanont, S. (2003). Emissions from an industrial fuel oil/gas-fired steam boiler. In Proceedings of the Second Regional Conference on Energy Technology towards a Clean Environment (RCETCE 2003), 12-14 February 2003, Phuket, Thailand, Vol. 1, pp. 141-147.
• Permchart, W., Kouprianov, V.I., Tantimuratha, L. (2003). Experimental study on a conical fluidized bed combustor firing rice husk. In Proceedings of the Second Regional Conference on Energy Technology towards a Clean Environment (RCETCE 2003) , 12-14 February 2003, Phuket, Thailand, Vol. 1, pp. 112-118.
• Permchart, W., Kouprianov, V.I. (2003). Fluidized bed combustion of pre-dried sugar cane bagasse. In Proceedings of the Second Regional Conference on Energy Technology towards a Clean Environment (RCETCE 2003), 12-14 February 2003, Phuket, Thailand, 6 p.
• Tanetsakunvatana, V., Kouprianov, V.I. (2003). Emission performance of utility boilers fired with Thai lignite. In Proceedings of the Second Regional Conference on Energy Technology towards a Clean Environment (RCETCE 2003), 12-14 February 2003, Phuket, Thailand, Vol. 1, pp. 556-563.
• Kaewboonsong, W., Kouprianov, V.I., Black, C.G., Douglas, P.L. (2003). Effect of fuel grade on the optimized unit loading in response to variable electricity demand of a fuel oil-fired power plant. Macro Review (The Review of Japan Macro-Engineers Society), Vol. 16, No. 1, pp. 83-87.
• Kouprianov, V.I., Tanetsakunvatana, V. (2003). Emissions from lignite-based power generation in Thailand over the post-crisis years. Macro Review (The Review of Japan Macro-Engineers Society), Vol. 16, No. 1, pp. 443-447.
• Lerdpatchareekul, N., Suvachittanont, S., Kouprianov, V.I. (2003). Minimizing total operational costs for an industrial steam boiler firing fuel oil/gas. Macro Review (The Review of Japan Macro-Engineers Society), Vol. 16, No. 1, pp. 73-77.
• Permchart, W., Kouprianov, V.I. (2003). Emissions from a conical fluidized bed combustor firing various biomass fuels. Macro Review (The Review of Japan Macro-Engineers Society), Vol. 16, No. 1, pp. 130-133.
• Kouprianov, V.I. (2002). Optimization of combustion air – a least-cost method for improvement of efficiency and environmental performance of boilers. In 10 Years of International Cooperation: FTI, Nippon Keidanren and TU SIIT Commemorative Publications 2002, pp. 109-114.
• Lerdpatchareekul, N., Suvachittanont, S., Kouprianov, V.I., Kaewboonsong, W. (2002). Optimization of combustion process for an industrial steam boiler. In Proceedings of the 9^th Congress of the Asian Pacific Confederation of Chemical Engineering (CHEMECA 2002) [CD-ROM]. 29 September - 3 October 2002, Christchurch, New Zealand, paper 329, 10 p.
• Kouprianov, V.I., Kaewboonsong, W. (2002). Combustion air optimization for a 310 MW fuel oil-fired steam boiler. In Proceedings of the 1^st International Conference on Sustainable Energy Technologies (SET 2002), 12-14 June 2002, Porto, Portugal, paper LC2, pp. LC7/28 to LC12/28.
• Permchart, W., Kouprianov, V.I. (2002). Design and experimental study of a conical fluidized bed combustor firing sawdust. In Proceedings of the 1^st International Conference on Sustainable Energy Technologies (SET 2002), 12-14 June 2002, Porto, Portugal, paper LC1, pp. LC1/28 to LC6/28.
• Kouprianov, V.I. (2002). Influence of lignite quality on airborne emissions from power generation in the Russian Far East and in Northern Thailand. Fuel Processing Technology, Vol. 76, Issue 3, pp. 187-199.
• Kouprianov, V.I., Bashkin, V.N., Towprayoon, S., Milindalekha, J., Wongyai, K. (2002). Emission of Arsenic and gaseous pollutants from power generation in Northern Thailand: Impact on ecosystems and human health. World Resource Review, Vol. 14, No. 1, pp. 98-115.
• Kouprianov, V.I. (2001). Modeling of thermal characteristics for a furnace of a 500 MW boiler fired with high-ash coal. Energy, Vol. 26, Issue 9, pp. 839-853.
• Kouprianov, V.I. (2001). Optimization of combustion air for control of gaseous emissions from pulverized coal-fired steam boilers. In Proceedings of the 2^nd International Symposium on Air Quality Management at Urban, Regional and Global Scales (AQM 2001), 25-28 September 2001, Istanbul, Turkey, pp. 278-283.
• Kouprianov, V.I., Black, C.G., Kaewboongsong, W. (2001). Alternative options for minimizing the rate of gaseous emissions from a variable-load fuel oil-fired power plant. In Proceedings of the 2^nd International Symposium on Air Quality Management at Urban, Regional and Global Scales (AQM 2001), 25-28 September 2001, Istanbul, Turkey, pp. 270-277.
• Kouprianov, V.I., Kaewboonsong, W. (2000). Assessment of annual rate of gaseous pollutants from variable-load fuel oil-fired steam boilers. In Proceedings of the Third Asia-Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2000), 3-6 December 2000, Hong Kong, pp. 503-507.
• Golaka, A., Kouprianov, V.I. (2000). Effect of fuel quality on the annual rate of harmful emissions from steam boilers fired with Thai lignites. In Proceedings of the 1^st Regional Conference on Energy Technology Towards a Clean Environment (RCETCE 2000), 1-2 December 2000, Chiang Mai, Thailand, pp. 262-266.
• Kaewboonsong, W., Kouprianov, V.I., Black, C.G. (2000). Optimization of the response of power plant boilers to varying energy demand. In Proceedings of the 1^st Regional Conference on Energy Technology Towards a Clean Environment (RCETCE 2000), 1-2 December 2000, Chiang Mai, Thailand, pp. 267-271.
• Kouprianov, V.I. (2000). Slagging and NOx formation in a furnace of a 300-MW boiler fired with Thai lignite. In Proceedings of the 1^st Regional Conference on Energy Technology Towards a Clean Environment (RCETCE 2000), 1-2 December 2000, Chiang Mai, Thailand, pp. 257-261.
• Permchart, W., Kouprianov, V.I. (2000). A mathematical model of sawdust combustion in a conical fluidized bed combustor. In Proceedings of the 1^st Regional Conference on Energy Technology Towards a Clean Environment (RCETCE 2000), 1-2 December 2000, Chiang Mai, Thailand, pp. 166-170.
• Bashkin, V.N., Kouprianov, V.I., Chullabodhi, C., Towprayoon, S., Khummongkol, P., Wangkiat, A., Wongyai, K. (2000). Ecological monitoring of the Thai lignite-fired power plant. In Proceedings of the International R & D Conference on Ecology and Power Generation, 18-20 October 2000, Moscow, Russia, pp. 244-247 (English version) and pp. 248-251 (Russian version).
• Kouprianov, V., Bashkin, V. (2000). Environmental impact of heavy metals contained in fly ash emitted from the Thai lignite-fired power plant. ASC Division of Fuel Chemistry, Preprints, Vol. 45, No. 1, pp. 83-87.
• Kouprianov, V., Chullabodhi, C., Kaewboonsong, W. (1999). Cost based optimization of excess air for fuel oil / gas-fired steam boilers. RERIC International Energy Journal, Vol. 21, No. 2, pp. 83-91.
• Kouprianov, V.I. (1999). Computational assessment of harmful emissions from boilers fired with Russian Far East lignites. In Proceedings of the Fifth International Joint Seminar on Regional Depositions Processes in the Atmosphere, 12-16 October 1999, Soul, Korea, pp. 53-62.
• Bashkin, V., Kouprianov, V. (1999). Methodological Aspects for Assessment of Heavy Metals Emission from Lignite-Fired Power Plants. In Proceedings of the Fifth International Joint Seminar on Regional Depositions Processes in the Atmosphere, 12-16 October 1999, Soul, Korea, pp. 31-42.
• Kouprianov, V.I. (1997). A cost-based approach to determining an optimal excess air for steam boilers. In Proceedings of the 1997 Annual Conference of the Engineering Institute of Thailand under H.M. the King’s Patronage, 20-23 November 1997, Bangkok, Thailand, pp. 801-811.
• Kouprianov, V.I., Utistham, T., Suttisonk, B. (1997). Kinetic model for estimation of CO emission in the conical fluidized bed combustor firing sawdust. In Proceedings of the Regional Symposium on Chemical Engineering (RSCE’97), 13-15 October 1997, Johor, Malaysia, Vol.1, pp. 245-251.
• Kouprianov, V.I., Utistham, T., Boonmun, S. Jatanakul, W., Suttisonk, B. (1996). Experimental investigations of sawdust burning in a conical bed combustor. In Proceedings of the 6^thNational Chemical Engineering Conference, November 1996, Bangkok, Thailand, Section E6, pp. 11-18.
• Paiboonpanupong, O., Kouprianov, V.I. (1996). Computational estimation of NOx emission in the furnace of a steam boiler. In Proceedings of the 6^thNational Chemical Engineering Conference, November 1996, Bangkok, Thailand, Section E6, pp. 1-10.
• Kouprianov, V.I., Tia, S., Boonamnuayvitaya, V., Dvoinishnikov, V.A., Izumov, M.A. (1996). Application of advanced zone-by- zone method in computation of furnaces firing fossil fuels. In Proceedings of the Asia-Pacific Conference on Sustainable Energy and Environmental Technology (APCSEET’96), 19-21 June, Singapore, pp. 330-339.
• Kouprianov, V.I. (1995). Burnout estimation in a zone-by-zone computational method for steam boiler furnaces. In Proceedings of the 9^th National Mechanical Engineering Conference, 9-11 November, Chiang Mai, Thailand, Section 6, pp. 1-13.
• Kouprianov, V.I. (1995). A model for predicting thermal characteristics of furnaces firing fuel oil and natural gas. In Proceedings of the 2^nd International Chemical Engineering Conference, 19-21 December 1995, Bangkok, Thailand, Section 1, pp. 32-39.
• Kouprianov, V., Tia, S. (1995). Computational investigations of thermal characteristics in a furnace firing pulverized Thai lignites. In Abstracts & Proceedings of the 4^th ASEAN Science and Technology Week, 21 August - 1 September 1995, Bangkok, Thailand, pp. 168-176.
• Leleyev, N.S., Kouprianov, V.I. (1992). Methodological guidelines on computation of the fluid circulation in steam generators. MPEI Publisher, Moscow, 12 p. (in Russian).
• Kouprianov, V.I. (1988). Computation of the dynamic processes in a control system and its elements. MPEI Publisher, Moscow, 28 p. (in Russian).
• Leleyev, N.S., Kouprianov, V.I., Kirilyuk, N.N. (1987). Computational method of determining the vibration characteristics of coiled tubes in the outer flow of working fluid. Izvestiya Vuzov (Universities’ Transactions), Vol. 10, pp. 62-66 (in Russian).
• Leleyev, N.S., Kouprianov, V.I., Kirilyuk, N.N. (1987). Study on dynamic characteristics of the coiled tubes. MPEI Transactions, Vol. 121, pp. 26-32 (in Russian).
• Kirilyuk, N.N., Kouprianov, V.I., Leleyev, N.S. (1987). A distance-piece for the heat exchanger tubes (Copyright Invention Certificate No. 1314223). In Bulletin of the USSR Government Committee for Scientific Inventions and Discoveries, Moscow, Russia, Vol. 20, 2 p. (in Russan).
• Leleyev, N.S., Kupryanov, V.I., Mishchenko, Yu.V., Shmarin, L.N. (1987). Determination of the natural frequencies of coiled tubes. Fluid Mechanics-Soviet Research, Vol. 16, No. 1, pp. 71-77 (in English).
• Leleyev, N.S., Kouprianov, V.I., Mishchenko, Yu.V., Shmarin, L.N. (1986). Determination of the natural frequencies of coiled tubes. Izvestiya Vuzov (Universities’ Transactions), Vol. 3, pp. 98-102 (in Russian).
• Kouprianov, V.I. (1985). A method of estimating of the associated fluid mass for vibrating coiled tubes. MPEI Transactions, Vol. 78, pp. 58-65 (in Russian).
• Avdeyev, G.V., Roslyakov, P.V., Izumov, M.A., Kouprianov, V.I. (1983). Cross-jet boiler furnace with an opposite arrangement of the burners. (Copyright Invention Certificate No. 1038706). In Bulletin of the USSR Government Committee for Scientific Inventions and Discoveries, Moscow, Russia, Vol. 32, 3 p. (in Russian).
• Chernyaev, V.I., Izumov, M.A., Dvoinishnikov, V.A., Kouprianov, V.I., Trofimchenko, S.I. (1983). Cross-jet furnace for firing different fuels. (Copyright Invention Certificate No. 1020692). In Bulletin of the USSR Government Committee for Scientific Inventions and Discoveries, Moscow, Russia, Vol. 20, 3 p. (in Russian).
• Izumov, M.A., Kouprianov, V.I., Roslyakov, P.V., Shabanov, I.I. (1983). The boiler furnace. (Copyright Invention Certificate No. 1035332). In Bulletin of the USSR Government Committee for Scientific Inventions and Discoveries, Moscow, Russia, Vol. 30, 2 p. (in Russian).
• Kouprianov, V.I., Shabanov, I.I., Sokolov, A.Yu., Belova, N.M., Potapov, A.P. (1983). Firing low-rank Donezk coals in a cross-jet furnace. MPEI Transactions, Vol. 20, pp. 100-105 (in Russian).
• Izumov, M.A., Kouprianov, V.I. (1982). Fundamentals of jet flow dynamics in furnaces of utility boilers. MPEI Publisher, Moscow, 80 p. (in Russian).
• Izumov, M.A., Kouprianov, V.I., Roslyakov, P.V. (1982). Design and thermal calculation of cross-jet boiler furnaces. MPEI Publisher, Moscow, 36 p. (in Russian).
• Kouprianov, V.I., Izumov, M.A. (1982). Computation of dynamic processes in steam boiler elements. MPEI Publisher, Moscow, 20 p. (in Russian).
• Izumov, M.A., Kouprianov, V.I. (1981). Computation of parallel jets of varying density in the zone of joint flow. MPEI Transactions, Vol. 524, pp. 3-8 (in Russian).
• Izumov, M.A., Kouprianov, V.I., Roslyakov, P.V. (1979). Cross-jet furnace for firing various fossil fuels. (Copyright Invention Certificate No. 705197). In Bulletin of the USSR Government Committee for Scientific Inventions and Discoveries, Moscow, Russia, Vol. 47, 7 p. (in Russian).
• Izumov, M.A., Roslyakov, P.V., Kouprianov, V.I. (1979). To problem of the design optimization of cross-jet boiler furnaces. MPEI Transactions, Vol. 396, pp. 40-45 (in Russian).
• Izumov, M.A., Kouprianov, V.I., Roslyakov, P.V., Shvedov, Yu.M. (1977). Firing various fossil fuels in a cross-jet furnace. MPEI Transactions, Vol. 330, pp. 87-91 (in Russian).
• Kouprianov, V.I. (1977). Effects of operating conditions on the combustion of homogeneous fuel/air mixture in turbulent flow. MPEI Transactions, Vol. 330, pp. 83-87 (in Russian).
• Kouprianov, V.I., Onoufriev, Ju.P. (1976). Computation of the time-domain transition process in a heat exchanger. MPEI Publisher, Moscow, 30 p. (in Russian).
• Kouprianov, V.I. (1975). Study on the fuel/air mixing and combustion in a cross-jet boiler furnace. Transactions of the Central Boiler-Turbine Institute (Leningrad branch), Vol. 132, 7 p. (in Russian).
• Kouprianov, V.I. (1975). Experimental study of the fuel/air mixing and combustion in a cross-jet furnace. MPEI Transactions, Vol. 269, 6 p. (in Russian).
• Izumov, M.A., Kouprianov, V.I. (1975). Influence of operating conditions on combustion of methane/air mixture in a cross-jet furnace. MPEI Transactions, Vol. 269, 7 p. (in Russian).
• Ippolitov, A.S., Kouprianov, V.I. (1975). To problem of the combustion computation in a flow of turbulent jets. Teploenergetika (Thermal Power Engineering), Vol. 5, pp. 81-83 (in Russian).
• Vassilyev, D.T., Kouprianov, V.I. (1973). To problem of designing the electrode-tool profile. MPEI Transactions, Vol. 156, 6 p. (in Russian).