NAME
PASSWORD
 
     
Click Here to E - Newsletter  
 
 
 
 


 
 
 
 
 
Faculty : School of Manufacturing Systems and Mechanical Engineering (MSME)
Name : Dr. Pisal Yenradee (Associate Professor)
Position : Associate Professor
E - Mail : pisal@siit.tu.ac.th
Phone Rangsit : +66-2-986-9009, +66-2-986-9101, +66-2-564-3226
Phone Bangkadi :
Phone Extension : 2107
 
Education
  • B.Eng. (1st Class Honors) in Production Engineering, King Mongkut s Institute of Technology North Bangkok, Thailand
  • M.Eng. in Industrial Engineering and Management, Asian Institute of Technology (AIT), Thailand
  • D.Eng. in Industrial Engineering and Management, Asian Institute of Technology (AIT), Thailand
Academic Awards
  1. Government of Germany Scholarship for Master's Degree at Asian Institute of Technology (June 1987 - Dec. 1988)
  2. Government of Japan Scholarship for Doctoral Degree at Asian Institute of Technology (Jan. 1990 - Dec. 1992)
  3. First Prize: Aggregate Production Planning, Master Production Scheduling, and Material Requirement Planning in a Garment Factory, Industrial Engineering Senior Project Contest 2005-2006, organized by Industrial Engineering Academic Committee, The Engineering Institute of Thailand Under H.M. The King s Patronage (E.I.T.), February 2006. (the award is received on behalf of a senior project advisor of B. Eng. students).
  4. First Prize: Thai Small- to Medium-Sized Industries Production Planning and Inventory Control Software, Industrial Aplication Software Contest: Student Category, organized by Industrial Promotion Department, Ministry of Industry, and Institute of Electric and Electronics, December 19, 2003 (the award is received on behalf of a thesis advisor of Ph.D. student).
  5. Consolation Prize: Application of Theory of Constraints in a flexible job shop, Best Practices of Industrial Engineering Technique Awards 2004-2005, organized by Industrial Engineering Academic Committee, Engineering Institute of Thailand, April 29, 2004 (the award is received on behalf of a thesis advisor of M. Eng. student).
Research Areas
    Production and Inventory control (P&IC) systems, JIT, MRP, and TOC; P&IC systems for Thai industries; P&IC in supply chain, Applied operations research; Systems simulation.
Research Interests

    Small- to medium-sized industries (SMIs) in Thailand face considerable production and inventory control (P&IC) problems. These problems greatly deteriorate the manufacturing competitiveness of SMIs. In order to alleviate the problems, their characteristics and causes should be analyzed. Some causes of the problems are manageable while others are non-manageable. The non-manageable problems must be considered as constraints for developing the P&IC systems. The P&IC systems suitable for the SMIs in Thailand should be developed based on these constraints. Particular research topics in this research area are listed as follows:

    Analyses of Production and Inventory Control Problems in Thai Industries

    There are various possible problems related to the production and inventory control (P&IC) systems in Thai industries. The nature, characteristics, and causes of such problems should be known in order to design an appropriate P&IC system or to improve the performance of the system. This research aims to identify the characteristics and also real causes of the encountered P&IC problems in Thai industries using an interview survey and case studies.

    Guideline or Methodology for Developing the Appropriate P&IC System for Thai Industries

    It is reasonable to assume that the situation of industries in developed and developing countries are different. Therefore, the P&IC systems widely used in developed countries, for example, Just-in-Time, MRP, and TOC (Theory of Constraints) may not be suitable for Thai industries. An entirely new system or a modification of certain existing systems may be required by Thai industries. This research aims to recommend P&IC techniques or systems suitable for Thai industries by focusing on aggregate planning, master production scheduling, detailed production and purchasing scheduling, and shop floor control.

 
Work Experiences
  • 1993-Present: SIIT
  • 2000-2004: Assistant Director for Special Affairs, SIIT
  • 1997-1999: Deputy Chairperson, Department of Industrial Engineering, SIIT
  • 1995-1996: Chairperson, Department of Industrial Engineering, SIIT
  • 1992: Associated Faculty, Industrial Engineering, Faculty of Engineering, Thammasat University
  • 1992: Consultant, Tanin Union Industries Co., Ltd., Thailand
  • 1989: Management Trainee, Lever Brothers Co., Ltd., Thailand

Teaching Courses

  • Operations Research I
  • Industrial Plant Design
  • Engineering Management
  • Material Management and Inventory Control
List of Publications

1. International Journal Papers

  • Wuttipornpun, T. and Yenradee, P. (2014). Finite capacity material requirement planning system for assembly flow shop with alternative work centres, International Journal of Industrial and Systems Engineering, Vol. 18, No. 1, pp. 95-124.
  • Paopongchuang, B. and Yenradee, P. (2014). Finite capacity material requirement planning with supplier constraints, International Journal of Industrial and Systems Engineering, Vol. 17, No. 3, pp. 350-375.
  • Piriyaniti, I. and Yenradee, P. (2013). Hybrid population-based variable neighbourhood search and simulated annealing algorithms for asymmetric travelling salesman problems, International Journal of Industrial and Systems Engineering, Vol. 15, No. 4, pp. 410-425.
  • Phruksaphanrat, B., Ohsato, A., and Yenradee, P. (2011). Aggregate production planning with fuzzy demand and variable system capacity based on theory of constraints measures, International Journal of Industrial Engineering: Theory, Applications and Practice, Vol 18, No 5, pp. 219-231.
  • Monthatipkul, C., Das, S. and Yenradee, P. (2010). Distribution Policy in an M-store Regional Supply Chain, International Journal of Integrated Supply Manaement, Vol. 5, No. 3, pp. 214-238.
  • Prakasvudhisarn, C., Kunnapapdeelert, S., and Yenradee, P. (2009). Optimal Cutting Condition Determination for Desired Surface Roughness in End Milling, International Journal of Advanced Manufacturing Technology, Vol. 41, Nos. 4-5, March 2009, pp. 440-451.
  • Monthatipkul, C. and Yenradee, P. (2008). Inventory/Distribution Control System in a One- Warehouse/Multi-Retailer Supply Chain, International Journal of Production Economics, Vol. 114, No. 1, pp. 119-133.
  • Akjiratikarl, C., Yenradee, P., and Drake, P.R. (2008). An Improved Particle Swarm Optimization Algorithm for Care Worker Scheduling, International Journal of Industrial Engineering and Management Systems, Vol. 7, No. 2, pp. 171-181.
  • Pongcharoen, P., Promtet, W., Yenradee, P. and Hicks, C. (2008). Stochastic Optimisation Timetabling Tool for University Course Scheduling, International Journal of Production Economics, Vol. 112, No. 2, pp. 903-918.
  • Akjiratikarl, C., Yenradee, P. and Drake, P.R. (2007). PSO-Based Algorithm for Home Care Worker Scheduling in the UK, Computers & Industrial Engineering, Vol. 53, No. 4, pp. 559-583.
  • Monthatipkul, C. and Yenradee, P. (2007). Positioning Safety Stock in a One-Warehouse Multi-Retailer Supply Chain Controlled by Optimal Inventory/Distribution Plan, International Journal of Industrial Engineering, Vol. 14, No. 2, pp. 169-178.
  • Wuttipornpun,T. and Yenradee, P. (2007). Performance of TOC Based Finite Capacity Material Requirement Planning System for a Multi-Stage Assembly Factory, Production Planning and Control, Vol. 18, No. 8, pp. 703-715.
  • Sirikrai, V. and Yenradee, P. (2006). Modified Drum-buffer-rope Scheduling Mechanism for a Non- identical Parallel Machine Flow Shop with Processing Time Variation, International Journal of Production Research, Vol. 44, No.17, pp. 3509-3531.
  • Sirikrai, V. and Yenradee, P. (2006). Modified DBR Scheduling Mechanism for a Non-identical Parallel Machine Flow Shop, International Journal of Industrial Engineering and Management Systems, Vol. 5, No. 2, pp. 102-115.
  • Techawiboonwong, A., Yenradee, P., and Das, S.K. (2006). A Master Scheduling Model with Skilled and Unskilled Temporary Workers, International Journal of Production Economics, Vol. 103, No. 2, pp. 798- 809.
  • Wuttipornpun,T., Yenradee, P., Beullens, P, and Oudheusden, D.L. (2006). Finite Capacity Material Requirement Planning System for a Multi-Stage Automotive-Part Assembly Factory, ScienceAsia: Journal of the Science Society of Thailand, Vol. 32, pp. 303-313.
  • Wuttipornpun,T., Yenradee, P, Beullens, P. and Oudheusden, D. L. (2005). A Finite Capacity Material Requirement Planning System for a Multi-Stage Assembly Factory: Goal Programming Approach, International Journal of Industrial Engineering and Management Systems, Vol. 4, No. 1, pp. 23-35.
  • Akjiratikarl, C. and Yenradee, P. (2004). Branch and Bound Approach for Single Machine Sequencing with Early/Tardy Penalties and Sequence Dependent Setup Cost, Industrial Engineering and Management Systems, Vol. 3, No. 2, pp. 100-115.
  • Wuttipornpun, T. and Yenradee, P. (2004). Development of Finite Capacity Material Requirement Planning System for Assembly Operations, Production Planning and Control, Vol. 15, No. 5, pp. 534-549.
  • Techawiboonwong, A. and Yenradee, P. (2003). Aggregate Production Planning with Workforce Transferring Plan for Multiple Product Types, Production Planning & Control, Vol. 14, No. 5, pp. 447- 458.
  • Techawiboonwong, A. and Yenradee, P. (2002). Aggregate Production Planning Using Spreadsheet Solver: Model and Case Study, ScienceAsia: Journal of the Science Society of Thailand, Vol. 28, No. 4, pp. 291-300.
  • Nanthavanij, S. and P. Yenradee (2001). Selecting Appropriate Degree of Automation of Component Insertion Method for Printed Circuit Board (PCB) Assembly, International Journal of Industrial Engineering - Theory, Applications, and Practice, March 2001, Vol. 8, No. 1, pp. 16-27.
  • Yenradee, P., Pinnoi, A. and A. Charoenthavornying (2001). Demand Forecasting and Production Planning for Highly Seasonal Demand Situation : Case Study of a Pressure Container Factory, ScienceAsia: Journal of the Science Society of Thailand, Vol. 27, No. 4, pp. 271-278.
  • Pandey, P.C., Yenradee, P., and Archariyapruek, S. (2000). A Finite Capacity Material Requirement Planning System, Production Planning and Control, Vol. 11, No. 2, pp.113-121.
  • Yenradee, P., and Dangton, R. (2000). Implementation Sequence of Engineering and Management Techniques for Enhancing the Effectiveness of Production and Inventory Control System, International Journal of Production Research, Vol. 38, No. 12, pp. 2689-2708.
  • Nanthavanij, S. and Yenradee, P. (2000). Evaluating the Effect of Work Period Length on Noise Exposure Reduction by the Daily Work Assignment Model, Industrial Engineering Research, Vol. 1, No. 2, pp. 146-163.
  • Nanthavanij, S. and Yenradee, P. (1999). Predicting the Optimum Number, Location, and Signal Sound Level of Auditory Warning Devices for Manufacturing Facilities, International Journal of Industrial Ergonomics, Vol. 24, pp. 569-578.
  • Yenradee, P., Nanthavanij, S., and Komolavanij, S. (1999). Capital Budgeting Analysis of Machine Selection and Part Assignment Problem: An Optimization Case Study, Journal of Engineering Valuation and Cost Analysis, Vol. 2, pp. 247-257.
  • Nanthavanij, S. and Yenradee, P. (1998). Machine Selection and Part Assignment Analysis Under Annual Budget Constraint: A Capital Budgeting Case Study, The Engineering Economist, Summer 1998, Vol. 43, No. 4, pp. 345-367.
  • Nanthavanij, S., Yenradee, P., and Techapichetvanich, K. (1995). An Intelligent Safety Feature for AGV's Economic Operations: A Simulation Analysis, Journal of Human Ergology, Vol. 24, No. 1, pp. 73-80.
  • Yenradee, P.; Van Oudheusden, D. L.; Tabucanon, M. T. (1995). Sequence for Managing the Situational Factors to Improve the Performance of Production and Inventory Control System, International Journal of Production Research, Vol. 33 No. 12. pp. 3349.
  • Yenradee, P. (1994). Application of Optimized Production Technology in a Capacity Constrained Flow Shop: A Case Study in a Battery Factory, Computers & Industrial Engineering, Vol. 27, No. 1-4, pp. 217-220.

2. National Journal Papers

  • Wuttipornpun, T. and Yenradee, P. (2007). A New Approach for a Finite Capacity Material Requirement Planning System, Thammasat International Journal of Science and Technology, Vol. 12, No. 2, pp. 28-51.
  • Monthatipkul C. and Yenradee, P. (2005). Inventory/Distribution Plan in a One-Warehouse/Multi- Retailer Supply Chain Thammasat International Journal of Science and Technology, Vol. 10, No. 2, pp. 9-20.
  • Nanthavanij, S. and Yenradee, P. (1995). Design and Analysis of Information-Based Car Parking System, Research and Development Journal of the Engineering Institute of Thailand, Vol. 6, No. 2, pp. 1-10.
  • Yenradee, P. and Nanthavanij, S. (1994). Comparative Performance Analysis between Manual and Automated Multi-product Assembly line, Research and Development Journal of the Engineering Institute of Thailand, Vol. 6, No. 1, pp. 25-32.
  • Nanthavanij, S. and Yenradee, P. (1994). On Optimal Location of an Auditory Alarm for Multiple Work Cell Factory Floor, Research and Development Journal of the Engineering Institute of Thailand, Vol. 5, No. 2, pp. 63-68.

3. International Conferences

  • Suprasongsin, S. and Yenradee, P. (2014). Supplier selection with multi criteria and multi products in volume discount and quantity discount environments, Proceedings of International Conference Image Processing, Computers and Industrial Engineering (ICICIE'2014), 15-16 January 2014, Kuala Lumpur, Malaysia, pp. 18-22.
  • Chotpradit, T. and Yenradee, P. (2013). Finite capacity scheduling of make-pack production: case study of adhesive factory, Proceedings of the 4th International Conference on Engineering, Project, and Production Management (EPPM 2013) [CD-ROM], 23-25 October 2013, Bangkok, Thailand, pp. 880-894.
  • Horng, S. and Yenradee, P. (2013). Multi-objectives finite capacity scheduling of make-and-pack production with options to adjust processing time, Proceedings of the 4th International Conference on Engineering, Project, and Production Management (EPPM 2013) [CD-ROM], 23-25 October 2013, Bangkok, Thailand, pp. 846-860.
  • Akkawuttiwanich, P. and Yenradee, P. (2013). Predictive performance evaluation method based on SCOR-make process: a case study in make-to-stock flow shop, Proceedings of the 8th International Congress on Logistics and SCM Systems (ICLS 2013), 5-7 August 2013, Tokyo, Japan, pp. 185-190.
  • Chumphoo, A., Yenradee, P., and Limmeechokchai, B. (2012). Analysis and selection of the best combination of energy policies: a case of Thailand’s energy system, Proceedings of the Third TSME International Conference on Mechanical Engineering [CD-ROM], 24-27 October 2012, Chiang Rai, Thailand, 8 p.
  • Paopongchuang, B. and Yenradee, P. (2012). A finite capacity material requirement planning for a supply chain network, Proceedings of the 2012 International Conference on Business and Information (BAI 2012) [CD-ROM], 3-5 July 2012, Sapporo, Japan, pp. D901-D916.
  • Makarangkurn, K. and Yenradee, P. (2011). Aggregate production planning with workforce transferring plan under uncertain demand and cost, Proceedings of the 7th IMT-GT International Conference on Mathematics, Statistics and its Applications (ICMSA 2011) [CD-ROM], 21-23 July 2011, Bangkok, Thailand, 15 p.
  • Paopongchuang, B. and Yenradee, P. (2011). A finite capacity material requirement planning for assembly job shop, Proceedings of the 3rd International Conference on Logistics and Transport (ICLT) & The 4th International Conference on Operations and Supply Chain Management (OSCM) 2011, 15-17 December 2011, Malé, Maldives, 11 p.
  • Chumphoo, A., Yenradee, P., and Limmeechokechai, B. (2011). Effect on KPIs of energy policies of Thailand, Proceedings of the Second TSME International Conference on Mechanical Engineering [CD-ROM], 19-21 October, 2011, Krabi, Thailand, 9 p.
  • Prompijit, A., Phusittrakool, A., Jeenanunta, C., Dumrongsiri, A., Yenradee, P. (2010). Optimization model for unit commitment in power operation planning, Proceedings of the Tenth International Conference on Industrial Management (ICIM 2010), 16-18 September 2010, Beijing, China. pp. 505-512.
  • Yenradee, P. and Kaorapapong, C. (2010). Cement supply chain planning under uncertainty: a fuzzy linear programming approach, Proceedings of the Tenth International Conference on Industrial Management (ICIM 2010), 16-18 September 2010, Beijing, China. pp. 139-145.
  • Yenradee, P., Predawut, S., Rungmanochai, P., and Eamcharoenying, W. (2010). Integrated aggregate production and marketing promotion planning under uncertainty: a case study, Proceedings of the 10th Global Congress on Manufacturing and Management (GCMM2010) [CD-ROM], 22-24 November 2010, Bangkok, Thailand. pp. 385-396.
  • Prompijit. A., Jeenanunta, C., Dumrongsiri, A., Komolavanij, S., and Yenradee, P. (2009). Optimization model of hydro and thermal electricity generation system for daily load dispatch scheduling, Proceedings of the 5th International Conference on Logistics and SCM Systems (ICLS 2009), 2-5 June 2009, Seoul, Korea. pp. 414-420.
  • Yenradee, P., Kitpipit, N., Thangthong, E., and Charoenpunthong, S. (2008). Aggregate production planning in a sugar factory: fuzzy programming approach, Proceedings of the 9th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2008) [CD-ROM], 3-5 December 2008, Bali, Indonesia. 8 p.
  • Phruksaphanrat, B., Yenradee, P., and Ohsato, O. (2008). Aggregate production planning with labor replacement in a parallel machine environment: possibilistic linear programming approach, Proceedings of the 4th International Congress on Logistics and SCM Systems (ICLS 2008) [CD-ROM], 26-28 November 2008, Bangkok, Thailand. pp. 80-88.
  • Jeenanunta, C., Yenradee, P., Komolavanij, S., and Ammarapala, V. (2008). Optimization model for daily load dispatch scheduling of electricity generation system, Proceedings of the 4th International Congress on Logistics and SCM Systems (ICLS 2008) [CD-ROM], 26-28 November 2008, Bangkok, Thailand. pp. 89-97.
  • Prompijit, A., Jeenanunta, C., Dumrongsiri, A., Komolavanij, S., and Yenradee, P. (2008). Optimization model for daily load dispatch scheduling of electricity generation system, Proceedings of the 10th IMAC Conference on Regional Innovation System and Manufacturing Culture (IMAC2008) [CD-ROM], 15-17 October 2008, Hyogo, Japan. 9 p.
  • Techaroongruengkij, B., Prakasvudhisarn, C., and Yenradee, P. (2007). A PSO based goal programming approach to aggregate planning of production, workforce, and pricing strategy, Proceedings of the 8th Asia Pacific Industrial Engineering & Management System and 2007 Chinese Institute of Industrial Engineers Conference (APIEMS & CIIE2007) [CD-ROM], 9-12 December 2007, Kaohsiung, Taiwan. 10 p.
  • Yenradee, P. and Sarvi, T. (2007). An integrated model for aggregate production planning and pricing, Proceedings of the 8th Asia Pacific Industrial Engineering & Management System and 2007 Chinese Institute of Industrial Engineers Conference (APIEMS & CIIE2007) [CD-ROM], 9-12 December 2007, Kaohsiung, Taiwan. 11 p.
  • Chongphaisal, P., Chiadamrong, N., Yenradee, P., and Kawtummachai, R. (2007). The study on the effectiveness of Thailand tourism strategy during 2004-2008 - the measurement through key performance indicators, Proceedings of the 8th International Joint World Cultural Tourism Conference 2007, 16-18 November 2007, Busan, South Korea. pp. 123-133.
  • Phruksaphanrat, B., Ohsato, A., and Yenradee, P. (2006). A comment on the formulation of an aggregate production planning problem, Proceedings of the 2006 IEEE International Conference on Cybernetics & Intelligent Systems and Robotics, Automation & Mechatronics (CIS-RAM 2006), 7-9 June 2006, Bangkok, Thailand, pp. 292-297.
  • Phruksaphanrat, B., Yenradee, P., and Ohsato, A. (2006). Fuzzy aggregate production planning model based on theory of constraints, Proceedings of the 7th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2006) [CD-ROM], 17-20 December 2006, Bangkok, Thailand, pp. 344-356.
  • Akjiratikarl, C. and Yenradee, P. (2005). Particle swarm optimization for the single machine total tardiness problem with sequence-dependent setup time, Proceedings of the Sixth Asia-Pacific Industrial Engineering and Management Conference (APIEMS 2005) [CD-ROM], 4-7 December 2005, Manila, Philippines. 11 p.
  • Monthatipkul, C. and Yenradee, P. (2005). Safety stock allocation in a four-stage supply chain controlled by optimal production/distribution plan, Proceedings of the First International Conference on Operations and Supply Chain Management, 15-17 December 2005, Bali, Indonesia. 7 p.
  • Akjiratikarl, C. and Yenradee, P. (2004). Optimisation of single-machine earliness and tardiness sequencing problem with sequence-dependent setup cost, Proceedings of the Fifth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS 2004): Applications and Practice [CD-ROM], 12-15 December 2004, Gold Coast, Australia. pp. 21.11.1 to 21.11.15
  • Wuttipornpun, T. and Yenradee, P. (2003). Performance analysis of finite capacity material requirement planning system for a capacity-constrained flow shop, Proceedings of the 12th International Pacific Conference on Automotive Engineering (IPC-12) [CD-ROM], 1-4 April 2003, Bangkok, Thailand, Paper No. M09, 6 p.
  • Akjiratigarl, C. and Yenradee, P. (2002). Dynamic programming with branch and bound algorithm for optimizing the single-machine early/tardy problem with sequence-dependent changeover cost, Proceedings of the Seventh International Pacific Conference on Manufacturing and Management (PCMM- 2002), 27-29 November 2002, Bangkok, Thailand. Vol. 2, pp. 946-951.
  • Sirikrai, V. and Yenradee, P. (2002). Appropriate techniques for finite capacity scheduling system under unreliable supplier situation, Proceedings of the Seventh International Pacific Conference on Manufacturing and Management (PCMM-2002), 27-29 November 2002, Bangkok, Thailand. Vol. 2, pp. 940-945.
  • Nanthavanij, S. and Yenradee, P. (2001). Determination of ergonomics work assignments for workers based on predefined machine operation schedules, Proceedings of the 5th International Conference on Engineering Design & Automation, 5-8 August 2001, Nevada, Las Vegas, USA. pp. 529-534.
  • Nanthavanij, S. and Yenradee, P. (2000). Minimum Number of Workers and Their Daily Work Assignments to Operate n Noisy Machines Based on the Permissible Noise Exposure Limit, Proceedings of the 5th Annual International Conference on Industrial Engineering - Theory, Applications and Practice [CD-ROM], 6 p.
  • Techawiboonwong, A. and Yenradee, P. (2000). Aggregate Production Planning in Thai Industries: An Application of Spreadsheet Solver, Proceedings of the Special International Conference on Production Research (ICPR-2000) [CD-ROM], 2-4 August 2000, Bangkok, Thailand, 7 p.
  • Yenradee, P. and Dangton, R. (2000). Development of Production Planning and Inventory Control System for Small- to Medium-Sized Industries in Thailand, Proceedings of the Special International Conference on Production Research (ICPR-2000) [CD-ROM], 2-4 August 2000, Bangkok, Thailand, 6 p.
  • Yenradee, P., Dangton, R. and Sirikrai, V. (2000). Development of a Finite Capacity MRP System for Small- to Medium-Sized Industries in Thailand, Proceedings of the 5th Annual International Conference on Industrial Engineering - Theory, Applications, and Practice [CD-ROM], Hsinchu, Taiwan, R.O.C.
  • Yenradee, P., Tongngam, P., Tingnapan, N. and Puchote, P. (2000). Comparison of Dynamic Sequencing Rule and Nonlinear Integer Programming Approach for Sequencing of Breakdown and Preventive Maintenance Activities, Proceedings of the Special International Conference on Production Research (ICPR-2000) [CD-ROM], 2-4 August 2000, Bangkok, Thailand, 6 p.
  • Nanthavanij, S. and Yenradee, P. (1999). Analytical Determination of Worker Assignment with Workplace Noise Consideration, Proceedings of the 25th International Conference on Computers and Industrial Engineering, 29-31 March 1999, Orleans, Louisaina, USA, pp. 411-414.
  • Nanthavanij, S., Yenradee, P., and Kullpataranirun, T. (1999). Quantitative Modeling of Daily Work Assignment Problems to Minimize the Maximum Noise Exposure, Proceedings of the 1999 Fall Conference of the Ergonomics Society of Korea and the International Symposium on Ergonomics, October 1999, Inchon, Korea, pp. 339-345.
  • Nanthavanij, S., Yenradee, P., Toyoda, Y. and Kullpattaranirun, T. (1999). Investigating the Effect of the Length of Work Period on Noise Exposure Reduction When Job Rotation is Allowed, Proceedings of the 4th Annual International Conference on Industrial Engineering Theory, Applications, and Practice [CD-ROM], San Antonio, Texas, USA.
  • Nanthavanij, S. and Yenradee, P. (1998). Developing a Framework for Justifying Human Roles and Contributions in Product Assembly Lines, Proceedings of the 2nd International Conference on Engineering Design and Automation (EDA '98), 9-12 August 1998, Hawaii, USA, 4 p.
  • Yenradee, P. (1997). Multiple Products Lot Sizing Under Two Levels of Setup Cost, Proceedings of the 22nd International Conference on Computers and Industrial Engineering, December 1997, Cairo, Egypt, pp. 367-370.
  • Yenradee, P., Pinnoi, A., and Charoenthavornying, A. (1997). Demand Forecasting and Production Planning for a Pressure Container Factory, Proceedings of the 14th International Conference on Production Research, 4-8 August 1997, Osaka, Japan, pp. 1470-1473.
  • Yenradee, P. and Rungroekrit, S. (1997). Optimal Sizes of Work-in-Process Buffers: Case Study in a Note Printing Factory, Advances in Engineering Design and Automation Research I, Proceedings of the International Conference on Engineering Design and Automation, 18-21 March 1997, Bangkok, Thailand, 4 p.
  • Nanthavanij, S., Yenradee, P., and Yosintra, P. (1996). A Method for Predicting the Number and Location of Auditory Alarms for the Manufacturing Facility, Advances in Applied Ergonomics, Proceedings of the 1st International Conference on Applied Ergonomics (ICAE'96), 21-24 May 1996, Istanbul, Turkey, pp. 179-182.
  • Nanthavanij, S., Yenradee, P., and Techapichetvanich, K. (1994). Application of Automated Storage and Retrieval System (AS/RS) Concepts in Car Parking Management, Proceedings of the 1994 Annual Conference of the Engineering Institute of Thailand, October 1994, Bangkok, Thailand, pp. IE61-72.
  • Nanthavanij, S. and Yenradee, P. (1994). On Optimal Location of An Auditory Alarm for Multiple-Work Cell Factory Floor, Proceedings of the 10th International Conference on CAD/CAM, Robotics, & Factories of the Future, Ottawa, Canada, August 1994, pp. 756-761.

Test Data for Care Workers Scheduling Problem

 
 
 
"siit.tu.ac.th" is the only official website of Sirindhorn International Institute of Technology (SIIT), Thammasat University.
  NEWS & ANNOUNCEMENT | REGISTRATION DIVISION | CORPORATE RELATIONS DIVISION | SIIT PUBLICATIONS | STUDENT AFFAIRS DIVISION | CONTACT | SITEMAP
 
  This site is best viewed with Internet Explorer.
  If you cannot view the page correctly, please click here to download Flash Player
  Sirindhorn International Institute of Technology, Thammasat University - Rangsit Campus
P.O.Box 22, Pathum Thani 12121, Thailand. Tel. +66 (0) 2986 9009, 2986 9101, Fax. +66(0) 2986 9112-3